Single Effect Falling Film Evaporator

• Extremely high heat transfer efficiency: Due to the extremely thin liquid film (usually less than 1 mm) and high turbulence, the heat transfer coefficient is very high, the evaporation intensity is high, and the equipment size is relatively small.

• Extremely short staying time: The liquid stays in the heating zone for an extremely short time (measured in seconds), making it ideal for processing highly heat-sensitive materials (such as fresh juice, vitamins, enzyme preparations, and certain antibiotics), minimizing thermal decomposition losses.

• No static pressure head loss, uniform boiling point: Unlike rising film and external circulation, falling film evaporation does not have a high liquid column inside the tube, so the boiling point is basically the same along the length of the tube, resulting in a large effective temperature difference and stable heat transfer driving force.

• It has a wide range of applicable viscosities: It can handle not only low-viscosity materials, but also medium-viscosity materials, because the drag force of the secondary steam helps to transport viscous liquid films.

• Not easy to scaling: The high-speed turbulent liquid film has a brushing effect on the pipe wall and there is no local overheating, which can delay scaling process.

One-year quality assurance, life-time maintenance.

If buyer met any problems during using, the seller will provide online service for free.